trigger screws

[jimmy2222]

ok, these trigger screws on the b2k w/pds' trigger, are HORRIBLEY annoying, how do you turn them! im afraid im gonna break the allan key if i know i won't then i'll give it a nice har twist. help guys. also this isn't my b2k its KN7's.

[ipaintballyourcar]

I know what you mean. The manuel is only good for a bathroom accessory. There's like 5 trigger screws and the manuel talks about adjusting 2 of them. BTW, it's righty tighty lefty loosey. That rule is good for everything except for my German Anschuetz .22 comp. rifle and that's 'cause it's metric.

[Smarty All American]

just use an allen wrench.if it doesnt work.ru using the right size.it should come with 2.and mine comes loose after only a hopper fool of shooting.it sucks.and actually the manual describes all 3 of the screws.all u doi is turn them.

[ipaintballyourcar]

I'm not talking about the three ON the trigger, I'm talking about the screws on the left side that are visible when the gun is upside down. I have no idea what they do.

[jimmy2222]

im afraid im gonnna break the allan wrench and its the perfect fit i tried it on the second and last one down (diff sizes) but i used the right ket but, it won't budge, it felt like if i did it any harder id break it.

[jimmy2222]

fixed, and it owns you :P !!

[KN7]

Thanks Jimmy2222!! BTW, I think the screws you see when its up side down (the hex/allen key screw), actually moves the whole trigger back... Before I could get the 3 screws in the trigger to move, that screw would move... Thats how I stripped my allen keys :( ;) ...

Anyways, they're pretty annoying until you break through the glue from ICD... Then its sweet!