PDA

View Full Version : plz anwser me fast

DeadonAccurate0504
05-21-2005, 04:27 PM
ya im thinkin bout buyin it i wonder if it fits or do i need the adjustable part so it will
JPSteelers1025
05-21-2005, 06:05 PM
it will. just need to push hard an line it up right. i also put a little of my lube on it.
DeadonAccurate0504
05-22-2005, 01:21 AM
ok cuz mine is comin in the mail soon and i dont wanna have to buy the extra piece for it
Poppintaco
05-22-2005, 01:57 AM
you can also get some 100 grit sand paper and sand that sucker down thats what i had to do with my halo
JPSteelers1025
05-22-2005, 02:20 AM
just put a little lube on the tip and the bottom of it the hopper part. it takes a bit of muscle lol but once you ge tit in there leave it in for a little bit the nwhen you take it out it should be good to go in from then on. that what i did.
MythicalAries
05-22-2005, 03:33 AM
that little bit of info helped me to. thanks
DeadonAccurate0504
05-22-2005, 03:36 PM
ya thv man my bro lost all my lubricant in the move to my new house
surealpaintballer
05-22-2005, 04:28 PM
Originally posted by JPSteelers1025@May 22 2005, 02:20 AM
just put a little lube on the tip and the bottom of it the hopper part. it takes a bit of muscle lol but once you ge tit in there leave it in for a little bit the nwhen you take it out it should be good to go in from then on. that what i did.
6622


u beter hope udont get it on the balls
dieselman
05-24-2005, 12:21 AM
why don't you just get a new feed neck???
tl+
05-24-2005, 01:21 AM
just sand the feedneck down a tinny bit.
xSPAWNx
05-24-2005, 05:59 PM
look here, i got the same setup as you do. An i spent 2 hours sanding down my hopper feed neck. You DON'T need too. Just take vaseline or petroleum jelly and put a tiny spec on ur finger. Rub that in a circle on the inside of ur feedneck on ur ion. The o-rings are dry so it is impossible to get a hopper down in there. after doing this, it should be able to sslip right in w/lil force and it will be snug. Ur o-rings will dry after taking it in and out like 10 times. so just do the same thing again.
Efaw
05-24-2005, 07:08 PM
i just twist it in, that is what it says in the manuel
xSPAWNx
05-24-2005, 11:20 PM
that works, but you can tear up ur o-rings in the feedneck or you take a risk of maybe breaking ur feedtube on ur hopper. the vaseline is cheap and easy