mod: soft bolt

[hawkeye]

this mod was done using a piranha GTI but i expect that it can also be done with other markers.:
The point to this mod is to prevent acedently knocking the bolt as its moving back. by using a cord or string insted of the hard matalic bolt
http://img217.echo.cx/img217/2272/hpim02189hc.jpg
http://img217.echo.cx/img217/8201/hpim02194rx.jpg
http://img217.echo.cx/img217/5112/hpim02203kn.jpg

to remove the original bolt you take out the silver/matalic pin conected to the green bolt .
after the rod is removed take your string/rope and incert it into the hole the rod was in. then reincert the pin to secure the rope. make shure the pin is in all the way. you wont be abole to get your gun back together if you dont.

if you decide to try this, tell me how it worked for you. if you have any ideas just post them here

[b_rich_1]

thats some pimped stuff. im gonna try that on my eforce srt
ill tell ya how it went later

[joeyk803c]

Pretty Cool Bro. I'll have to try that.