Problems with gun! HELP!

[PA!NT3ALLA4L!F3]

Hey my bko 0'4 is shooting really low on fps... How can i increase it

[Doorman]

Increase your inline reg pressure. This would be the best start. You can sweetspot it out at a chrono and a lot of paint. Start shooting with the reg turned way down low, then keep increasing pressure and shooting a couple balls through. You will eventually reach a point where the fps levels off and begins to drop. Back the pressure down to the highest fps you reached and this is the regulator sweetspot. Do any fine tuning of your fps through the velocity adjustment or dwell adjustments if available on your marker.

[PA!NT3ALLA4L!F3]

Originally posted by Doorman@Jul 12 2005, 02:49 AM
Increase your inline reg pressure. This would be the best start. You can sweetspot it out at a chrono and a lot of paint. Start shooting with the reg turned way down low, then keep increasing pressure and shooting a couple balls through. You will eventually reach a point where the fps levels off and begins to drop. Back the pressure down to the highest fps you reached and this is the regulator sweetspot. Do any fine tuning of your fps through the velocity adjustment or dwell adjustments if available on your marker.
41010




Lol k thanks

[DevGroup9l2]

if you have a stock 04 bko. i would set hpr to 250psi and use the lpr for the velocity. make sure you back the lpr out before you adjust the hpr that high