ok so here is my prob air flow prob

[jr874]

ok so here is my problem. I bought the gti for 60 right well the gun worked ok up until bout 3 days ago when it developed an air leak problem well i brought the gun into a pro shop and we fixed the air leak problem but now it wont recock itself. the battery is brand new i just put it in about three days ago so it's not that. this gun has given me nothing but probs since i bought it any ideas????

[yellowpumpguy]

Do you have a full tank? If it doesn't recock, that sounds like not enough pressure is getting into the marker. If it has a regulator on it, try turning it up.

[joeyk803c]

Originally posted by yellowpumpguy@Jul 8 2005, 02:42 PM
Do you have a full tank?* If it doesn't recock, that sounds like not enough pressure is getting into the marker.* If it has a regulator on it, try turning it up.
38679



Could be a hammer o-ring problem, but make sure your tank is full and that is screwed all the way in.

[jr874]

yes the tank is full all the o rings were changed also an no it dsnt have a regulator.

[joeyk803c]

What color spring are you using?

[jr874]

Originally posted by jr874@Jul 8 2005, 09:01 PM
yes the tank is full all the o rings were changed also an no it dsnt have a regulator.
38788


red

[mbiron41]

If these peoples suggestions dont work, the people most likely screwed up the striker and sear when they worked on your gun. Take it back and let them know your situation.

[jr874]

it is recocking but not all the way and when u fire barely any air comes out

any other ideas???

[joeyk803c]

Originally posted by jr874@Jul 8 2005, 06:32 PM
it is recocking but not all the way and when u fire barely any air comes out

any other ideas???
38821



That red spring is the toughest spring. Do you have any other colored springs?

[jr874]

Originally posted by joeyk803c@Jul 9 2005, 12:16 AM
That red spring is the toughest spring. Do you have any other colored springs?
38941



we tried changing the spring out to

[Doorman]

Take it back to whomever worked on it. There's a problem if this wasn't occuring prior to them working on it. They should fix it for free.

But either something is in backwards, valve isn't aligned properly, not properly lubed, or there is an obstruction (possibly on the valve pin) causing this.

[navysealguy]

also the bolt can come loose( at least on the r6) so check it out

[jr874]

Originally posted by Doorman@Jul 9 2005, 02:18 PM
Take it back to whomever worked on it. There's a problem if this wasn't occuring prior to them working on it. They should fix it for free.

But either something is in backwards, valve isn't aligned properly, not properly lubed, or there is an obstruction (possibly on the valve pin) causing this.
39123



i nvr even thought of checking the value pin or looking for an obstruction. btw cing as how i knw the guy he was already fixing it for free