the hoses on some of the autocokers

[spyderman982]

:huh: What do those three hoses on some of thouse guns do ??? :huh:

[Young]

the three hoses on the front of the autococker directs air from the low pressure (lpr) reg, to the three way, which leads air to the ram.

the lpr draws air from the ASA and directs it to the middle barb/hose on the three way. your trigger is linked to that three way. the three way just directs air to the ram. when you pull the trigger, the three way switches to the middle and the furthest (from the trigger) barb/hose which forces the ram to push the back block back thus re-cocking the gun and allowing another ball to chamber into the breach.

when you release the trigger, the three way switches to the middle and closest (to the trigger) barb/hose which forces the ram to pull forward the back block completing the cocking cycle.

so basically, those three components in the front of any autococker just does the cycling action.

[X4SmuRf20X]

also without the hoses and the tree way the gun wouldnt work!!!

[yellowpumpguy]

Originally posted by X4SmuRf20X@Jul 7 2005, 08:26 PM
also without the hoses and the tree way the gun wouldnt work!!!
38352

:D Yes it could. Just stick a pump handle on it. Mine S5 works fine with out a three way and a bunch of hoses. Along with most of my friends Cockers. ;)