Some Pmr Questions

[I <3 Paintball]

I have some questions about the PMR. When taking my bolt out for the first time, I noticed that the threading on the back cap, seemed to be somewhat stripped. I look closely, and the stripped part looked like plastic. There is resistance getting the bolt back in, but after adjusting it and moving it slightly, it slips into place. I want to know if I can order some spare back caps for my PMR.

Also, how do I adjust the velocity on the PMR? I read through the manual, and couldn't quite get a solid answer from it. On the back of the gun, on the right side, there is an insert where an allen wrench can be put into. I found a size that fit the socket, but it didn't seem to turn, so I didnt pressure it and left it alone. I also read about the dwell, and wondered to myself if you adjust the velocity by changing the value of the dwell?

Please help!

[bballryand316]

You can order NDZ Metal/Aluminum back caps. I did, and my gun isnt even here yet.

My guess for velocity would be the reg's output pressure to the gun.

[I <3 Paintball]

You can order NDZ Metal/Aluminum back caps.
[/b]

Where from?

[bballryand316]

I bought mine from "CARTUNES99" on pbnation. Brand New.

[bryce moulton]

correct me if the pmr doesnt have a hyper 2 but the velocity adjustment should be on the reg.
annddd
no velocity will not change your dwell value "unless i reading what you said wrong"

[I <3 Paintball]

Yea, your right about the Hyper 2. So to adjust my velocity, I need to use an allen wrench on the bottom of the hyper 2? I always thought that socket was meant for dis-assembling the Hyper 2 Regulator.

Thanks m8

-edit-

Is it normal for the lower half of the hyper 2 to turn when adjusting the velocity via the allen socket on the bottom?

[I <3 Paintball]

Guys. Please help me. Something has gone wrong with my gun... I was giving the bolt kit is basic maintenance, and all pieces had been screwed on correctly, but the PMR will not fire! I made sure that the air supply was lined up with the hole in the bolt tube, but still, nothing. I played with my reg and turned it counter-clockwise, but that made air leak out of the bolt. I re-adjusted the reg to stop the leaking but it still wont shoot. I had the eyes off, shooting plain air. Please help, I hope I didnt mess my gun up.

Please help me, I am starting to get worried and convinced I may not get my gun to work!

[Metric]

My gun was leaking out of the back, make sure it is in TIGHT!

[what the poop]

try a new battery if its still not shooting. also see if someone at your local pro shop/ field whatever would look at it for you.