TOTAL NEWB NEED HELP

[FCKL]

ok to get this one started off...i ADMIT i am a total newb and a retard ok so anyone who cares to flame me please dont bother?!?!
now that we got that out of the way
I NEED HELP
i took apart my Viewloader Orion to clean it AND NOW I CANT
PUT IT BACK TOGETHER?!?!?!?!
if anyone could help me out if they are familiar with this gun...or can
point me in the right direction...

a couple things im having problems with:
-on the lower barrel area...there is something sticking up right above
where the trigger is and i cant get it down...
-figuring out which parts go where

yes i am a newb!
FCKL

[Takon]

Ok well first of all, you need to get the bolt and striker back together, either they have a hole in one and a bar sticking out of the other, OR there's a longer peice like a top cocking bolt that holds it all together. then, you put in the spring in the bottom tube, then the buffer and the shim in the back, put the end cap back on and replace the pin.

[yellowpumpguy]

The this sticking up above the trigger area is the sear. It's basically the same as a Spyder if you can you'll have to take the trigger frame off then put the internals in and then put the frame back on.

[surealpaintballer]

my brother has a triad pretty much the same........take out ur manuel and refer to it

[Takon]

well, you don't have to take off the frame, just puch on the bolt a bit, then pull the trigger to release the sear