Leak in E2 Solenoid.? HELP?

[paintballkilla69]

i installed a e2 trigger on my cocker and when all the leaks were fixed i had 1 left in the solenoid, i talked to everyone else i no with e-cockers and they all have the same leak somewhere in the solenoid, (not the hoses) , help please?

[Young]

double check to make sure your gasket is seated properly. if that isnt it, you want to make sure you are not overpressureing the solenoid from your LPR

[paintballkilla69]

thanks for that, i think my lpr is 2 high, i use co2 though and what you mean by gasket seated properly?.?

[joeyk803c]

That is problem. I bet you wrecked your noid.

[Doorman]

He might not have if proper precautions were taken. The rubber gasket inside the solenoid, make sure it is aligned properly. If it gets pinched even slightly it will leak.

[Young]

co2 will also make it leak if you are rapid firing (doorman... dont give me grief on this lol :D) the co2, as a liquid, can build up in the solenoid and boil in the solenoid causing a pressure spike. if you do not know what your solenoid gasket is, i would recommend taking it to your local store and have them check it out.

[Doorman]

LOL, I won't give you grief on this one. I fully agree. Rapid fire with CO2 can be a concern for any marker with a solenoid. Unfortunately even the best precautions can fail .001% of the time ;)

[Zorber]

It could be CO2 but also if you take apart the noid there could either be a busted O-ring on the 3-way rod or it could be out of line.