Does the Omen have...

[Dr.Jekyll&Mr.Hyde]

does the Evil Omen 2.0 have Vision or some sort of Paintball detection system, or lazer eyes, that checks if each paintball is properly loaded and avioding chopping

25+ u would think it would have some sort of vision but im not sure please help

[maldon007]

no it has that funky side mounted cam thingy... more like anti-chop bolt than eyes... go with a vision marker.

[Dr.Jekyll&Mr.Hyde]

do a lot of balls get chopped

and wut does the cam exactly do and how does it function

[joeyk803c]

Originally posted by Dr.Jekyll&Mr.Hyde@Mar 27 2006, 02:14 PM
do a lot of balls get chopped

and wut does the cam exactly do and how does it function
186196



If the recock is set right, no chops at all.

[Evilpaintballer888]

Don't listen to what some people think about the Omen. The Cam arms are paddles that push the ball into the firing chamber. If the Omen is set right it should work perfectly. The bolt goes back when cocked, while moving, the bolt pushed the cam arms making a ball go in. Fires and continues. The only breaks are barrel breaks and crappy paint. It works just as good as vision, my cousin has a vision shocker and I have less chops then him.

[Dr.Jekyll&Mr.Hyde]

Originally posted by joeyk803c@Mar 27 2006, 06:29 PM
If the recock is set right, no chops at all.
186235


thanks a lot

how do u set the recock just right
lemme guesss its in the manual

i dont have the gun yet im just doing research on it be4 i buy it

[Dr.Jekyll&Mr.Hyde]

Originally posted by Evilpaintballer888@Mar 27 2006, 09:39 PM
Don't listen to what some people think about the Omen.* The Cam arms are paddles that push the ball into the firing chamber.* If the Omen is set right it should work perfectly.* The bolt goes back when cocked, while moving, the bolt pushed the cam arms making a ball go in. Fires and continues.* The only breaks are barrel breaks and crappy paint.* It works just as good as vision, my cousin has a vision shocker and I have less chops then him.
186411


hey thanks a lot also
same question how do u set up the recocking perfectly

again just doing research getting the specs for probably my future gun

[Evilpaintballer888]

first you turn the recock pressure screw all the way going clockwise.Next you put the pressure in the going through the regulator into the marker really low(it says how to do it in the manual)Clockwise makes pressure go down,counter-clockwise makes the pressure go up. To increase velocity you put more turn the pressure in the regulator up. Then you increase the velocity until you get what you want, like all markers. Then you turn the recock screw a little bit each time, shooting in between turns, until it consistently recocks, then turn it 1/8 more. It seems complicated, but you'll have it memorized in no time. Just Remember to READ the manual all the way through.

Look at Pbnation.com's evil forums too. They have alot of FAQ on the Omen and how to tune it, and an animation on how the cam arms work.

[Dr.Jekyll&Mr.Hyde]

Originally posted by Evilpaintballer888@Mar 27 2006, 09:45 PM
first you turn the recock pressure screw all the way going clockwise.Next you put the pressure in the going through the regulator into the marker really low(it says how to do it in the manual)Clockwise makes pressure go down,counter-clockwise makes the pressure go up. To increase velocity you put more turn the pressure in the regulator up.* Then you increase the velocity until you get what you want, like all markers. Then you turn the recock screw a little bit each time, shooting in between turns, until it consistently recocks, then turn it 1/8 more.* It seems complicated, but you'll have it memorized in no time.* Just Remember to READ the manual all the way through.

Look at Pbnation.com's evil forums too.* They have alot of FAQ on the Omen and how to tune it, and an animation on how the cam arms work.
186416


thanks a lot again u really helped me out

[Sinkhole]

Heres how it works.

Omen Animation (http://www.pbnation.com/showthread.php?t=776974)

[bballryand316]

To be honest, i chopped A LOT of balls.
I had a revvy, and they feed around 10 bps. I was shooting maybe 14 or 15. I slowed down, and it still broke a few. But it was still recocking. Twisted recock a little, and it hasnt chopped since.
However, i was REALLY out of air then also.