Where to lube at

[Numkut]

Where should I lube my gun at? I was hoping to keep my gun clean so I don't have to take that mofo apart. I should lube around the bolt correct? Where else should I lube?

[MHarvey124]

Um, first we need to know what type of gun you.

[Numkut]

Tippmann Model 98

[xPropheTx]

Anything that causes friction...I'm not too familiar with the internals on the 98 so I can't tell you what specifically. What I do with my A-5 is lube the bolt, power tube, and hammer...then put a few drops into the reciever, screw in my air tank, and dry fire about 6 times to get everything else lubed.

[paintknowitall]

i usually take mine apart every so often and lube around the bolt. Then there is one oring in the very back around the end cap that i put oil on. then i put oil on the very front part that pushes the paintball out there is an o-ring around there and i put a few drop in the tiny hole and like he said dry fire a couple of shots.

[surealpaintballer]

if u dont take it apart...bolt o ring

ada threadsand the front bolt o rings

take it apart preetty buch everything that has a o ring or friction

[stayfly3327]

ok please some1 ban him now