PDA

View Full Version : trigger mod

bigmatt
11-05-2005, 06:42 AM
Is there a simple way to reduce trigger pull length?
maldon007
11-05-2005, 06:45 AM
depends on the gun.
bigmatt
11-05-2005, 06:53 AM
Originally posted by maldon007@Nov 5 2005, 02:45 AM
depends on the gun.
111468

Oops sorry about that. Its a BLVF G3
maldon007
11-05-2005, 07:15 AM
Originally posted by bigmatt@Nov 5 2005, 03:53 AM
Oops sorry about that.* Its a BLVF G3
111471


BLVF G3 = mech piranha? if so, a trigger stop might help, this can be done a. (ghetto style) put somthing behind the trigger to stop it as soon as it releases the sear (jb weld, or super glue a nut or somthing). or b. (modd shop style) remove trigger, drill hole & tap 8/32, put in a set screw, set till it stops against the frame just after the sear...blah blah blah. you can also file the sear some to make the actual sear release lighter & shorter (but too much filing, and gun no workie). so the first one is safer.
bigmatt
11-05-2005, 07:20 AM
Originally posted by maldon007@Nov 5 2005, 03:15 AM
BLVF G3 = mech piranha? if so, a trigger stop might help, this can be done a. (ghetto style) put somthing behind the trigger to stop it as soon as it releases the sear (jb weld, or super glue a nut or somthing). or b. (modd shop style) remove trigger, drill hole & tap 8/32, put in a set screw, set till it stops against the frame just after the sear...blah blah blah. you can also file the sear some to make the actual sear release lighter & shorter (but too much filing, and gun no workie). so the first one is safer.
111472

ok..thanks